SpeakerRepairShop - your speaker parts

Products

Foam surrounds Rubber surrounds Cloth surrounds Glue Dust-caps Spiders Gaskets Tinsel lead Woofers Midranges Tweeters Diaphragms Crossover parts Ferrofluid for loudspeakers Recone kits Speaker grille cloth / Grille fabric Terminal tray Other products Discount corner

Information

News Ordering from outside the EU? Shipping costs 2024 Photos... Contact Tips from users Suggestions? Terms & conditions

Social media

Glue for speaker repair - 50 cc

This adhesive comes with a brush and seperate dosing cap

Glue for speaker repair - 50 cc
€ 9,29 *Prices include VAT
Article code:  lijm50Kwast
5 star(s) in 1 review(s) Write a review
This is water-based glue. Do you have a mailbox on the road (outside your home), and there's very cold winter weather, the adhesive may freeze. After freezing, the adhesive has become unusable.

Glue that has been frozen can be identified by:
  • It's hard / impossible to shake the glue, it is no longer liquid.
  • The glue clots. Usually white cots can be seen on the brush.
  • The glue is watery when the brush gets out. You see the condensation on the brush.
Speaker glue with condensation - don't use it


Shelf life: up to 3 months.

General
Special water-based, permanent-flexible adhesive for speaker repair. This bottle contains 50 cc glue.

This glue is suitable for:

  • Gluing foam surrounds to a speaker cone / frame
  • Gluing rubber surrounds to speaker cone / frame
  • Gluing fabric surrounds to speaker cone / frame
  • Gluing dust-caps to a speaker cone
  • Gluing gaskets

This glue is not suitable for gluing spiders and voice coils.

Storage
This is a water based adhesive. Keep the adhesive in a frost-free room.

Processing
Surface must be flat, dry, and free dust and grease. Apply the glue with brush or roller. The Elastic adhesive dries relatively quickly. If thicker layers are applied, or the adhesive is used with less porous materials , the drying time will be significantly longer. The glue is dry when the color is transparent and the original white is gone. The adhesive can be applied both single- and double-sided. For a higher final strength and longer drying / processing time we recommend to apply the glue doublesided. Remove wet glue immediately with a wet cloth, dried adhesive residue can be removed mechanically. Clean tools immediately after use with water.

Features:
Base: acrylic dispersion
Solids content: about 60%
Density: approximately 1 g / cm ³
Viscosity about 5000 mPa's
25 °C pH value: 5.5
Min. processing temperature (MFT): 10 ° C
Wet color: white
Dry color: transparent
Odor: odorless (slightly acidic)
Number of components: 1
Temperature resistance (dried): -40 ° C to +160 ° C
Moisture resistance: good (if applied doublesided)
Open time: infinite - lasting tack
Drying time: Depending on the circumstances of 30 minutes to 2 hours.
Consumption: 250 g / m²

Safety sheet
In case of problems the safety sheet is available here.

Reviews

Number of reviews: 1
Average rating: review.stars ☆ ☆ ☆ ☆ ☆ Write a review
☆ ☆ ☆ ☆ ☆ 12-02-2019
Best glue ever.
I've tried other glues and they either dry too fast, aren't
transparent when dry or don't grip enough. This one is a
pleasure to work with. It's a delicate job and sometime you
need to reposition the foam multiple times even with shims.
This glue is perfect. With the 50cc bottle I was able to
refoam 2x 12" woofers, 2x 5" mids, 2x 6.5" woofers and still
have some. If you buy foams here don't forget to buy also
this glue, it's money well spent, and the job will be a
pleasure!