Replacing the foam surround of a REL Q100 / Q100E woofer
1. Remove the woofer from the cabinet. Remove the gasket, the old foam surround and carefully clean the back of the speakercone as well as possible. If necessary, remove the dust cap to facilitate centering later. Also clean the frame of the woofer as much as possible.
2. The old foam surround has been removed, the frame has been cleaned and the old dust cap has been removed. Without a dust cap, it is easier to center the woofer.
4. Shims are placed between the coil and the magnet. Thick paper is used here, we recommend photo negatives. Paper can get wet and weaken, making it difficult or impossible to remove. After placing the shims, the foam surround is glued to the cone and then to the frame. The decorative gasket has been placed back and is glued on top of the foam surround. The shims ensure that the coil remains centered.
5. The shims are removed and the new dust cap is glued to the cone. More info on the dust cap here. The woofer can now be connected and placed back in the cabinet.
Nice that you visit our site. Please indicate here which cookies we may place. The necessary cookies do not collect personal data. The other cookies help us to improve the site and your visitor experience. They also help us to inform you about our products. Are you going for an optimally working website including all the benefits? Then tick all the boxes!